| Displaying 1 to 10 (of 13 products) |
Result Pages: 1 |
 |
 |
Safecoat 3 in 1 Adhesive
Safecoat 3 in 1 Adhesive is designed for hard composition — ceramic, vinyl, parquet, formica and slate — floor and counter tiles. 3 in 1 Adhesive gives equivalent performance to hazardous chlorinated solvent adhesives without the toxicity. Also excellent as a carpet adhesive. |
 |
Click for More Details
$19.80 |
 |
| |
 |
Safecoat DynoSeal
Safecoat DynoSeal creates a unique water- proof, vapor -proof, moisture proof membrane. A low odor elastomeric emulsion which remains flexible over time, use it to seal out moisture in underlayment for shower stalls, tubs, pools and saunas in basements, on roofs, on retaining walls, around air ducts –anywhere moisture collects. Safecoat DynoSeal adheres well to concrete block, metal and wood, providing a vapor -barrier against moisture. It also is an excellent sound deadener. If used on a sun-drenched or exposed surface, such as when sealing a roof, use Safecoat DynoFlex RoofGuard as a top coat to provide protection from ultraviolet rays. |
|
Click for More Details
$51.70 |
|
| |
 |
Safecoat DynoSeal Driveway and Asphalt Sealer
DynoSeal Driveway/Asphalt Sealer is a low odor elastomeric sealer and topcoating for asphalt surfaces. It helps to reduce the offgassing and offensive smells generated by new asphalt, while preserving and renewing existing asphalt surfaces. |
|
Click for More Details
$28.60 |
|
| |
 |
Safecoat DynoFlex Textured Natural
Safecoat DynoFlex is an incredibly flexible sealer that expands and contracts in varying weather and temperatures. DynoFlex seals seams and joints in old and new air conditioning ducts, damaged asphalt shingles, mobile home metal roof cracks and decking. Available in natural beige. |
|
Click for More Details
$57.20 |
|
| |
 |
Safecoat DynoFlex RoofGuard
An elastomeric roof coating particularly recommended as a top coat for Safecoat DynoSeal. It is water-resistant, flexible - up to 300% - bridges small cracks very well, and is very durable. DynoFlex RoofGuard can be used on composition roofs, rock roofs, cured hot melt asphalt, new polyurethane foam, properly primed wood, metal, masonry, tilt-up concrete and mobile homes. It reflects ultraviolet light and can result in lowering the inside temperature from 10-20 degrees F. |
|
Click for More Details
$44.00 |
|
| |
 |
Safecoat Caulking Compound
Safecoat Caulking Compound is a multi-purpose caulking compound that provides a water resistant, flexible, easy to install, non-sag sealant with excellent initial and permanent adhesion. Resin rich formula affords maximum bond strength. Use for windows, sealing cracks, filling holes, door perimeters, walls and woodwork, siding openings and masonry cracks. Available in 10.5 oz. tubes. |
|
Click for More Details
$10.00 |
|
| |
 |
Safecoat Lock-In Sanding Sealer
Safecoat Lock-In Sanding Sealer is a fast drying, sandable sealer specially formulated to help raise the grain of new wood in preparation for sanding prior to finish coating. One gallon of Safecoat Lock-In New Wood Sealer covers 250 square feet in one coat depending on surface porosity. Very low odor, very low voc, excellent for both amateur and professional furniture finishers. |
|
Click for More Details
$34.10 |
|
| |
 |
Safecoat WaterShield
Safecoat WaterShield is a versatile water repelling sealer which provides an invisible barrier against water and resists oils, grease and similar liquids. It is fast drying, has excellent adhesion, is easy to apply, and can be used interior or exterior. In addition to sealing and providing a protective barrier against water migration, it helps to harden, dust proof and control efflorescence in masonry surfaces, and serves as a wooden deck sealer in combination with DuroStain Clear. It is not toxic, non-flammable, lead and formaldehyde free and does not contain surface contaminating silicones. |
|
Click for More Details
$40.70 |
|
| |
 |
Safecoat MexeSeal
Safecoat MexeSeal is one of the most durable Safecoat sealers. For porous, unpolished mexican clay tile, stone, granite, slate, concrete and stone pavers, and masonry surfaces where oil and water repellancy are desired. Non hazardous and non-flammable, MexeSeal is a replacement for high solvent content floor sealing systems. Multiple coats will build an attractive gloss finish. Used in retail stores on their pavers, Mexeseal is great for the homeowner who wants a tough but environmentally safe clear sealer. |
|
Click for More Details
$45.10 |
|
| |
 |
Safecoat Hard Seal
Because Safecoat Hard Seal forms a continuous membrane, when applied properly it is particularly effective at sealing in pollution or outgassing of toxic chemical compounds from surfaces. An excellent multi-use, water-based, general purpose clear sealer for vinyl, porous tile, plastics and unfinished (e.g. plywood) cabinetry (always test for adhesion prior to use). Multiple coats will build an attractive gloss finish. Do not apply Hard Seal to surfaces subject to standing water or heavy moisture. Not for use on particle board (please use Safe Seal). |
|
Click for More Details
$14.30 |
|
| |
|
|
|
| Displaying 1 to 10 (of 13 products) |
Result Pages: 1 |
|
confirmed secure site
